-
Stone Fabrication Tools
-
Board
-
Zigzag Crack Chasers
- Xpress Dry Concrete Blades
- Xpress Shark Blades
- Dry Concrete Blades
- All-Round Anycon Blades
- Dry Asphalt-Green Concrete Blades
- LT Blades (Laser Turbo Segmented Blades)
- Brick Blades
- HB Blades (Very Hard Brick & Pavers Blades)
- Refractory Blades
- Joint Cleaning Blades
- Universal Blades
- Laser Tuck Point Blades
- Tuck Point Blades with TCT Protection
- Zigzag Grooving Blades / For Heating Lines
- Crack Chasers
- Zigzag Crack Chasers
- U Groove Crack Chasers
Zigzag Crack Chasers
Silver brazed / Dry or wet / Zigzag cutting design
Professional Zigzag Crack Chaser for Wide Crack Routing and Repair Preparation
Crack repair preparation often requires a wider cutting profile to open and prepare damaged areas before sealing or repair.
DIATOP Zigzag Crack Chaser is designed for dry or wet crack-chasing applications using a zigzag cutting configuration.
The 125 mm blade provides a variable cutting-width specification for wider crack routing and repair preparation.
The blade is silver brazed and intended for applications where a broader groove is required than with conventional narrow crack chaser blades.
Key Features
- Zigzag crack chaser design.
- Designed for wide crack routing.
- 125 mm diameter.
- Variable cutting-width specification.
- Silver brazed.
- Dry or wet cutting.
Available Sizes
Item – Diameter inch / Diameter mm / Cutting Width
- ZCB – 5 inch / 125 mm / 7m-16m
Technical Notes
- Diameter: 125 mm
- Cutting Width: 7m-16m
- Silver brazed
- Dry or wet use
Typical Applications
zigzag crack chasing, wide crack routing, crack widening, concrete crack repair preparation, pavement crack preparation, repair groove cutting, sealant preparation, dry crack chasing, wet crack chasing
Q1. What diamond tool is recommended for wider crack-chasing applications?
A. DIATOP Zigzag Crack Chaser is designed for wider crack-routing applications and uses a zigzag cutting configuration. The ZCB model has a 125 mm diameter and a variable cutting-width specification.
Q2. Can the Zigzag Crack Chaser be used for both dry and wet cutting?
A. Yes. DIATOP Zigzag Crack Chaser is silver brazed and designed for both dry and wet cutting applications.
Q3. What cutting width is available for the ZCB Zigzag Crack Chaser?
A. The catalog lists the ZCB with a 5 inch (125 mm) diameter and a cutting-width specification of 7m-16m.
For crack chaser selection guidelines, cutting-width selection, dry and wet operating conditions, and troubleshooting guidance, please visit the DIATOP Tech Notes section.
