XPRESS Soff-Cut Turbo Blades

Patterned diamond technology / Dry / Laser welded / Sharp edge segments

Professional Turbo Early-Entry Blades for Very Fresh Green Concrete

Very early concrete cutting requires a blade capable of entering fresh concrete quickly while maintaining efficient cutting performance.

DIATOP XPRESS SOFCUT TURBO Blades are designed for very fast early-entry cutting using sharp edge segments combined with patterned diamond technology.

The blades are especially suitable for green concrete poured within one or two hours, making them suitable for demanding early-entry concrete cutting applications where cutting must begin soon after placement.

The turbo-style sharp edge segment design supports fast entry into fresh green concrete during dry cutting operations.

Type of Equipment: ES / FL (Early Entry Saws / Flat Saws – 13 HP or less)

Key Features

• Very fast entry due to sharp edge segments with patterned diamond technology.
• Especially suitable for green concrete poured within one or two hours.
• Patterned diamond technology.
• Dry cutting.
• Laser welded.

Available Sizes

Item – D x T inch / D x T mm / Segment Height inch / Segment Height mm

• DSXVS3032 – 12 x .125 inch / 305 x 3.2 mm / .472 inch / 12 mm
• DSXVS3432 – 13 1/2 x .125 inch / 343 x 3.2 mm / .472 inch / 12 mm
• DSXMS3032 – 12 x .125 inch / 305 x 3.2 mm / .472 inch / 12 mm
• DSXMS3432 – 13 1/2 x .125 inch / 343 x 3.2 mm / .472 inch / 12 mm

* Other bond available upon request

Typical Applications

green concrete cutting, very early-entry concrete cutting, fresh concrete cutting, concrete cutting within one or two hours after pouring, dry green concrete cutting, early-entry saw cutting, concrete control joint cutting, fresh concrete slab cutting, patterned diamond blade cutting, turbo early-entry blade cutting

Q1. What diamond blade is recommended for very early cutting of green concrete?

A. DIATOP XPRESS SOFCUT TURBO Blades are designed for very fast early-entry cutting in green concrete. Sharp edge segments combined with patterned diamond technology help the blade enter fresh concrete quickly.

Q2. Can XPRESS SOFCUT TURBO Blades cut concrete shortly after it is poured?

A. Yes. XPRESS SOFCUT TURBO Blades are especially suitable for green concrete poured within one or two hours, according to the catalog.

Q3. What helps the XPRESS SOFCUT TURBO Blade achieve fast entry into green concrete?

A. The blade uses sharp edge segments with patterned diamond technology. This segment design is intended to provide very fast entry during early-stage green concrete cutting.

For early-entry blade selection guidelines, bond selection, dry-cutting operating conditions, and troubleshooting guidance, please visit the DIATOP Tech Notes section.