CNC Z Wheels

Wet / For aggressive stock removal and surface calibration / For granite, marble, and quartz

Professional CNC Z Wheel for Aggressive Stock Removal and Surface Calibration

Stone calibration work requires a tool capable of removing material aggressively while maintaining controlled surface processing.

DIATOP CNC Z Wheel is designed for wet CNC applications requiring aggressive stock removal and surface calibration.

The wheel is suitable for granite, marble, and quartz.

Key Features

• Aggressive stock removal.

• Designed for surface calibration.

• Suitable for granite.

• Suitable for marble.

• Suitable for quartz.

• Wet use.

Available Sizes

Item – Diameter inch / Diameter mm / Segment Height mm / Position

• CNZ 80 – 3.15 inch / 80 mm / 35 mm / Position 1

Operation Parameters

• RPM: 4,500–8,000

• Feed rate: 800–2,500 mm/min

Technical Notes

• Wheel Type: CNC Z Wheel

• Wet use

• Diameter: 80 mm

• Segment Height: 35 mm

• Position: 1

• Suitable materials: Granite, marble, quartz

• Recommended RPM: 4,500–8,000

• Recommended Feed Rate: 800–2,500 mm/min

Typical Applications

granite stock removal, marble stock removal, quartz stock removal, CNC stone calibration, surface calibration, aggressive stone grinding, CNC stone fabrication, countertop fabrication, granite fabrication, marble fabrication, quartz fabrication

Q1. What is the CNC Z Wheel used for?

A. DIATOP CNC Z Wheel is designed for aggressive stock removal and surface calibration in wet CNC stone-processing applications.

Q2. What materials can the CNC Z Wheel be used on?

A. The catalog specifies granite, marble, and quartz.

Q3. What operating parameters are recommended for the CNC Z Wheel?

A. The catalog specifies 4,500–8,000 RPM with a feed rate of 800–2,500 mm/min.

For CNC Z Wheel selection guidelines, RPM settings, feed rates, wet operating conditions, and troubleshooting guidance, please visit the DIATOP Tech Notes section.