TURBO STAR / Turbo Star with Flange

Dry / Traditional turbo blade / For granite / Standard and flange versions available

Professional Dry Turbo Blades for Fast Granite Cutting

Dry granite cutting requires a blade capable of maintaining fast cutting performance across common stone fabrication applications.

DIATOP TURBO STAR is a traditional turbo blade designed for fast dry cutting of granite.

The range is available in both standard blade and flange-mounted configurations, allowing selection according to the required machine setup.

Multiple diameters and blade thicknesses are available from 4 inches to 9 inches.

Key Features

• Traditional turbo blade.

• Fast cutting of granite.

• Dry cutting.

• Standard blade version available.

• Flange-mounted version available.

• Flange version available with M14 or 5/8"-11 thread.

Available Sizes – TURBO STAR

Item – D x T inch / D x T mm

• STR 100 – 4 x .087 inch / 100 x 2.2 mm

• STR 115 – 4 1/2 x .087 inch / 115 x 2.2 mm

• STR 125 – 5 x .095 inch / 125 x 2.4 mm

• STR 150 – 6 x .095 inch / 150 x 2.4 mm

• STR 180 – 7 x .098 inch / 180 x 2.5 mm

• STR 200 – 8 x .098 inch / 200 x 2.5 mm

• STR 230 – 9 x .110 inch / 230 x 2.8 mm

Available Sizes – Turbo Star with Flange

Item – D x T inch / D x T mm

• STRF 125 – 5 x .095 inch / 125 x 2.4 mm

• STRF 180 – 7 x .098 inch / 180 x 2.5 mm

• STRF 230 – 9 x .102 inch / 230 x 2.6 mm

* Available thread: M14, 5/8"-11

Technical Notes

• Blade Type: Traditional turbo

• Dry cutting

• Standard blade version: STR

• Flange-mounted version: STRF

• Available flange thread: M14, 5/8"-11

• Suitable material: Granite

Typical Applications

granite cutting, dry granite cutting, granite tile cutting, stone cutting, turbo blade cutting, flange turbo blade cutting, angle grinder granite cutting, power hand saw cutting, tile saw cutting, granite fabrication, stone fabrication

Q1. What dry turbo blade is recommended for fast granite cutting?

A. DIATOP TURBO STAR is a traditional turbo blade designed for fast dry cutting of granite. Standard and flange-mounted versions are available depending on the machine configuration.

Q2. What is the difference between TURBO STAR and Turbo Star with Flange?

A. The standard TURBO STAR uses the STR item series, while the flange-mounted version uses the STRF series. The flange version is available with M14 or 5/8"-11 thread.

Q3. What sizes are available for TURBO STAR?

A. Standard TURBO STAR blades are available from 4 to 9 inches, while Turbo Star with Flange is available in 5, 7, and 9 inch diameters.

For turbo blade selection guidelines, flange and thread compatibility, dry-cutting operating conditions, and troubleshooting guidance, please visit the DIATOP Tech Notes section.