VOLCANO Low-Horsepower Saw Blades

For granite / Silent / Silver brazed / Wet / For low-horsepower saws and railsaws

Professional Low-Horsepower Saw Blade for Hard Granite

Granite cutting on lower-power machines requires a blade designed to maintain stable cutting performance without overloading the saw.

VOLCANO Low Horsepower Saw Blade is designed for low-horsepower saws and railsaws in the 3–5 HP range.

The blade uses a soft bond for cutting hard granite and is intended for wet cutting applications.

Available in 14 and 16 inch diameters, both specifications use a 10 mm segment height and a 60/50 mm arbor.

Type of Equipment: M / M (Tile Saw / Table Saw)

Key Features

• Suitable for low-horsepower saws.

• Suitable for railsaws of 3–5 HP.

• Soft bond for cutting hard granite.

• Silent blade.

• Silver brazed.

• Wet cutting.

Available Sizes

Item – D x T inch / D x T mm / Segment Height mm

• NLHP 353210 – 14 x .125 inch / 350 x 3.2 mm / 10 mm

• NLHP 403210 – 16 x .125 inch / 400 x 3.2 mm / 10 mm

* Arbor: 60/50 mm

Operation Parameters

Diameter (Inch / mm) / Max RPM / Feed rate (Feet/min)

• 14 / 350 / 1400–1600 / 8–15

• 16 / 400 / 1200–1400 / 8–15

Technical Notes

• Bond: Soft

• Segment Height: 10 mm

• Arbor: 60/50 mm

• Machine compatibility: Low-horsepower saws and railsaws of 3–5 HP

• Silent blade

• Silver brazed

• Wet cutting

Typical Applications

hard granite cutting, granite slab cutting, low-horsepower granite cutting, railsaw granite cutting, tile saw granite cutting, table saw granite cutting, countertop fabrication, stone fabrication, granite fabrication, wet granite cutting

Q1. What granite blade is recommended for low-horsepower saws and railsaws?

A. VOLCANO Low Horsepower Saw Blade is designed for low-horsepower saws and railsaws in the 3–5 HP range. It uses a soft bond for cutting hard granite.

Q2. What sizes are available for VOLCANO Low Horsepower Saw Blade?

A. The blade is available in 14 inch (350 mm) and 16 inch (400 mm) diameters, both with a 10 mm segment height and 60/50 mm arbor.

Q3. What operating parameters are recommended for VOLCANO Low Horsepower Saw Blade?

A. For the 14-inch blade, the catalog lists 1400–1600 RPM with a feed rate of 8–15 ft/min. For the 16-inch blade, the listed range is 1200–1400 RPM with the same 8–15 ft/min feed rate.

For recommended RPM settings, feed rates, wet-cutting operating parameters, machine compatibility, and troubleshooting guidance, please visit the DIATOP Tech Notes section.