VOLCANO Miter Cut Blades for Granite

Silent / Reinforced core / Silver brazed / Wet

Professional Miter Cut Bridge Saw Blades for Granite

Granite miter cutting requires a blade that can maintain stability and edge control while cutting angled sections.

VOLCANO Miter Cut Blades for Granite are designed specifically for miter cutting applications on granite.

A very special soft bond is used for very hard granite, while the reinforced steel plate core is designed to withstand the pressure placed on the segments when cutting angles.

The blades are wet cutting, silver brazed, and use a silent reinforced-core construction for professional granite fabrication.

Type of Equipment: BS (Bridge Saw)

Key Features

• Designed for miter cutting on granite.

• Very special soft bond for very hard granite.

• Reinforced steel plate core designed to withstand pressure placed on the segments during angle cutting.

• Silent blade.

• Reinforced core.

• Silver brazed.

• Wet cutting.

Available Sizes

Item – D x T inch / D x T mm / Segment Height mm / Arbor

• MCG 353212 – 14 x .125 inch / 350 x 3.2 mm / 12 mm / Arbor: 60/50 mm

• MCG 403212 – 16 x .125 inch / 400 x 3.2 mm / 12 mm / Arbor: 60/50 mm

Technical Notes

• Segment Height: 12 mm

• Arbor: 60/50 mm

• Bond: Very special soft bond

• Core Type: Reinforced steel plate core

• Silent blade

• Silver brazed

• Wet cutting

Operation Parameters

• While entering and exiting a cut, reduce the feed speed by 40–50%.

• When cutting at 45°, reduce the feed speed by 40%.

Typical Applications

granite miter cutting, 45-degree granite cutting, granite angle cutting, bridge saw miter cutting, granite countertop fabrication, mitered countertop edge fabrication, stone fabrication, granite slab processing, architectural stone fabrication, professional granite fabrication

Q1. What bridge saw blade is recommended for miter cutting granite?

A. VOLCANO Miter Cut Blades for Granite are designed specifically for granite miter cutting. They use a very special soft bond for very hard granite and a reinforced steel plate core for angle-cutting applications.

Q2. Why does the VOLCANO Miter Cut Blade use a reinforced core?

A. The reinforced steel plate core is designed to withstand the pressure placed on the segments when cutting angles.

Q3. What feed-speed adjustments are recommended for miter cutting?

A. The catalog recommends reducing feed speed by 40–50% while entering and exiting a cut. When cutting at 45°, feed speed should be reduced by 40%.

For miter blade selection guidelines, feed-speed recommendations, wet-cutting operating parameters, and troubleshooting guidance, please visit the DIATOP Tech Notes section.