FLASH Turbo Silent Blades for Granite

Wet / Silver brazed / Turbo segment / Titanium-coated diamonds / Silent blade

Professional Silent Turbo Bridge Saw Blade for Very Hard Granite

Very hard granite requires a bridge saw blade capable of maintaining fast cutting performance while producing clean edges and stable results throughout slab fabrication.

DIATOP FLASH Turbo is a silent bridge saw blade designed for very hard granite.

Turbo-shaped segments support fast cutting, while titanium-coated diamonds are used for improved blade life. The laminated sandwich core helps reduce noise during cutting.

The blade is designed for high-speed cutting and clean, chip-free edges in professional granite fabrication applications.

Type of Equipment: BS (Bridge Saw)

Key Features

• Suitable for very hard granite.

• Turbo-shaped segments for fast cutting.

• Titanium-coated diamonds for better life.

• Designed for high-speed cutting with FLASH Turbo.

• Laminated sandwich core to reduce noise.

• Clean edge with chip-free cutting.

• Silent blade.

• Wet cutting.

• Silver brazed.

Available Sizes

Item – D x T inch / D x T mm / Segment Height mm

• NSTG 353220 – 14 x .125 inch / 350 x 3.2 mm / 20 mm

• NSTG 403220 – 16 x .125 inch / 400 x 3.2 mm / 20 mm

• NSTG 453620 – 18 x .141 inch / 450 x 3.6 mm / 20 mm

• NSTG 504020 – 20 x .157 inch / 500 x 4.0 mm / 20 mm

• NSTG 604220 – 24 x .165 inch / 600 x 4.2 mm / 20 mm

* Arbor: 60/50 mm

Technical Notes

• Segment Type: Turbo

• Segment Height: 20 mm

• Titanium-coated diamonds

• Core Type: Laminated sandwich core

• Arbor: 60/50 mm

• Silent blade

• Wet cutting

• Silver brazed

Typical Applications

very hard granite cutting, granite slab cutting, bridge saw cutting, turbo granite cutting, high-speed granite cutting, chip-free granite cutting, countertop fabrication, stone fabrication, granite fabrication, slab processing, architectural stone fabrication, monument fabrication

Q1. What bridge saw blade is recommended for very hard granite and fast cutting?

A. DIATOP FLASH Turbo is a silent bridge saw blade designed for very hard granite. Its turbo-shaped segments are designed for fast cutting, while titanium-coated diamonds support improved blade life.

Q2. How does FLASH Turbo help reduce noise during granite cutting?

A. The blade uses a laminated sandwich core specifically designed to reduce noise during cutting.

Q3. What features support clean edge quality with FLASH Turbo?

A. The catalog specifies clean, chip-free cutting. The blade also combines turbo-shaped segments, titanium-coated diamonds, and silent blade construction for professional granite fabrication.

For recommended RPM settings, feed rates, wet-cutting operating parameters, and troubleshooting guidance, please visit the DIATOP Tech Notes section.